ECRI Microelectronics

Design of Dual Output DC/DC-copy-1520219510

Abstract: In this paper, firstly the circuit about BUCK and CUK configuration are analyzed, the design of DC/DC converter with two different outputs based on ISL6420B and LT3580 is described .Secondly ,theoretical parameters are calculated, the auxiliary devices are selected.and the main function of circuit simulation is performed, combined with actual adjusting, circuit design is improved, Finally, the experimental results and waveform are given. 
Relate News
  • Design of a Surge Suppression High Power DC DC Converters

    Design of a Surge Suppression High Power DC DC Converters

    January 29, 2018This article introduces design scheme of a surge suppression high power DC DC converters. The design principle and the key technology are analyzed, and the design simulation and experiment are implement. At last, the main technical specification and testview
  • Design of a dual output high power DC DC converters

    Design of a dual output high power DC DC converters

    March 5, 2018Abstract: Based on the 100W power output as the research object, this paper introduces the model of half-bridge topology and analysis the transformer, power switch tube power loss in a half-bridge top...view
  • Design of dual channel digital converter based on RD-19230

    Design of dual channel digital converter based on RD-19230

    August 31, 2018Abstract:Based on the angle Converter chip RD-19230, We designed a 14 pairs of channel Synchro resolver –digital converter. This article gives the features, internal structure and working principle of the chip. Using R chip as the core design of the conveview
  • Design of closed-loop Detection Control System for MEMS Gyroscope

    Design of closed-loop Detection Control System for MEMS Gyroscope

    January 10, 2018Abstract : The open-loop detection system of MEMS gyroscope has obvious disadvantages in anti-interference and bandwidth,which cannot meet the requirement of high accuracy.A sensitive mode closed-loop control system based on the force feedback balance ofview
  • The circuit design of bipolar voltage –controlled oscillator

    The circuit design of bipolar voltage –controlled oscillator

    April 9, 2018Abstract: The bipolar voltage-controlled oscillator is the key circuit in the series of synchro-digital converters. On basis of analyzing the operating principle of the bipolar voltage-controlled osci...view
  • Building a DC DC Power Supply that Works

    Building a DC DC Power Supply that Works

    February 26, 2018Abstract: This article discusses importantconsiderations when designing a DC DC power supply. Topics include choosing theright DC DC converters for the application; MOSFET gate capacitance; highswitchi...view